34 mm to Inches
Convert 34 millimeters to inches — instant, accurate, and easy
The Answer
Browse metric rulers on Amazon.
📄 Free printable mm to inches chart (PDF) — every mm from 1 to 300.
How to Convert 34 mm to Inches
To convert 34 millimeters to inches, divide the millimeter value by 25.4. This is because one inch equals exactly 25.4 millimeters — a standard defined by international agreement.
The Calculation
Applying the formula to 34 mm:
Result Summary for 34 mm
- Decimal inches: 1.3386″
- Fractional inches: 1 11/32″ (nearest 1/64)
- Feet and inches: 0 ft 1.34 in
Reference Table — Values Near 34 mm
| Millimeters | Decimal Inches | Fractional Inches |
|---|---|---|
| 31 mm | 1.2205″ | 1 7/32″ |
| 32 mm | 1.2598″ | 1 17/64″ |
| 33 mm | 1.2992″ | 1 19/64″ |
| 34 mm | 1.3386″ | 1 11/32″ |
| 35 mm | 1.3780″ | 1 3/8″ |
| 36 mm | 1.4173″ | 1 27/64″ |
| 37 mm | 1.4567″ | 1 29/64″ |
34 mm in Other Units
Millimeters convert cleanly into every other length unit. Here is 34 mm expressed seven different ways — useful when a drawing, spec sheet or supplier quotes a unit other than inches.
| Unit | 34 mm equals |
|---|---|
| Centimeters (cm) | 3.4 cm |
| Meters (m) | 0.034 m |
| Inches (in) | 1.3386 in |
| Feet (ft) | 0.1115 ft |
| Yards (yd) | 0.03718 yd |
| Thousandths of an inch (mil) | 1,338.6 mil |
| Typographic points (1/72 in) | 96.38 pt |
How Accurate Is Each Fraction of 34 mm?
34 mm equals 1.3386″ (rounded to four decimal places). Any fraction is a further rounding of the full-precision value, so each one carries a small error. This table shows the closest fraction at each common denominator and how far it actually sits from 34 mm.
| Rounded to | Fraction | Decimal | Fraction vs. original |
|---|---|---|---|
| Nearest 1/2″ | 1 1/2″ | 1.5000″ | +4.100 mm (above original) |
| Nearest 1/4″ | 1 1/4″ | 1.2500″ | −2.250 mm (below original) |
| Nearest 1/8″ | 1 3/8″ | 1.3750″ | +0.925 mm (above original) |
| Nearest 1/16″ | 1 5/16″ | 1.3125″ | −0.663 mm (below original) |
| Nearest 1/32″ | 1 11/32″ | 1.3438″ | +0.131 mm (above original) |
| Nearest 1/64″ | 1 11/32″ | 1.3438″ | +0.131 mm (above original) |
For woodworking, DIY and general workshop use, 1 11/32″ is the practical choice — it lands within 0.4 mm of 34 mm. For machining, toolmaking or CAD, use the decimal value 1.3386″ rather than any fraction.
FAQ About 34 mm to Inches
How many inches is 34 mm?
34 millimeters equals 1.3386 inches (rounded to 4 decimal places), or approximately 1 11/32″ (nearest 1/64 inch).
How accurate is the 34 mm to inches conversion?
The conversion of 34 mm to 1.3386 inches uses the exact definition 1 inch = 25.4 millimeters; the four-decimal result is rounded, so it is approximate.
Can I convert 34 mm to feet?
Yes. 34 millimeters equals approximately 0 ft 1.34 in.
📏 Need to measure 34mm accurately?
A steel ruler marked in millimeters makes it easy to find 34 mm (≈ 1.3386″). See current options:
→ See precision steel rulers on Amazon
Or step up to a digital caliper for finer work →
As an Amazon Associate, we earn from qualifying purchases at no extra cost to you.