264 mm to Inches
Convert 264 millimeters to inches — instant, accurate, and easy
The Answer
Browse tape measures on Amazon.
📄 Free printable mm to inches chart (PDF) — every mm from 1 to 300.
How to Convert 264 mm to Inches
To convert 264 millimeters to inches, divide the millimeter value by 25.4. This is because one inch equals exactly 25.4 millimeters — a standard defined by international agreement.
The Calculation
Applying the formula to 264 mm:
Result Summary for 264 mm
- Decimal inches: 10.3937″
- Fractional inches: 10 25/64″ (nearest 1/64)
- Feet and inches: 0 ft 10.39 in
Reference Table — Values Near 264 mm
| Millimeters | Decimal Inches | Fractional Inches |
|---|---|---|
| 261 mm | 10.2756″ | 10 9/32″ |
| 262 mm | 10.3150″ | 10 5/16″ |
| 263 mm | 10.3543″ | 10 23/64″ |
| 264 mm | 10.3937″ | 10 25/64″ |
| 265 mm | 10.4331″ | 10 7/16″ |
| 266 mm | 10.4724″ | 10 15/32″ |
| 267 mm | 10.5118″ | 10 33/64″ |
264 mm in Other Units
Millimeters convert cleanly into every other length unit. Here is 264 mm expressed seven different ways — useful when a drawing, spec sheet or supplier quotes a unit other than inches.
| Unit | 264 mm equals |
|---|---|
| Centimeters (cm) | 26.4 cm |
| Meters (m) | 0.264 m |
| Inches (in) | 10.3937 in |
| Feet (ft) | 0.8661 ft |
| Yards (yd) | 0.28871 yd |
| Thousandths of an inch (mil) | 10,393.7 mil |
| Typographic points (1/72 in) | 748.35 pt |
How Accurate Is Each Fraction of 264 mm?
264 mm equals 10.3937″ (rounded to four decimal places). Any fraction is a further rounding of the full-precision value, so each one carries a small error. This table shows the closest fraction at each common denominator and how far it actually sits from 264 mm.
| Rounded to | Fraction | Decimal | Fraction vs. original |
|---|---|---|---|
| Nearest 1/2″ | 10 1/2″ | 10.5000″ | +2.700 mm (above original) |
| Nearest 1/4″ | 10 1/2″ | 10.5000″ | +2.700 mm (above original) |
| Nearest 1/8″ | 10 3/8″ | 10.3750″ | −0.475 mm (below original) |
| Nearest 1/16″ | 10 3/8″ | 10.3750″ | −0.475 mm (below original) |
| Nearest 1/32″ | 10 13/32″ | 10.4063″ | +0.319 mm (above original) |
| Nearest 1/64″ | 10 25/64″ | 10.3906″ | −0.078 mm (below original) |
For woodworking, DIY and general workshop use, 10 25/64″ is the practical choice — it lands within 0.4 mm of 264 mm. For machining, toolmaking or CAD, use the decimal value 10.3937″ rather than any fraction.
FAQ About 264 mm to Inches
How many inches is 264 mm?
264 millimeters equals 10.3937 inches (rounded to 4 decimal places), or approximately 10 25/64″ (nearest 1/64 inch).
How accurate is the 264 mm to inches conversion?
The conversion of 264 mm to 10.3937 inches uses the exact definition 1 inch = 25.4 millimeters; the four-decimal result is rounded, so it is approximate.
Can I convert 264 mm to feet?
Yes. 264 millimeters equals approximately 0 ft 10.39 in.
📏 Need to measure 264mm accurately?
A tape measure marked in millimeters covers 264 mm and much more (264 mm ≈ 10.3937″). See current options:
Read our 25ft tape measure buying guide →
As an Amazon Associate, we earn from qualifying purchases at no extra cost to you.